To ensure the normal operation of the disc granulator and extend its service life, the daily maintenance of the bearings is of vital importance. The following are some specific maintenance methods and suggestions:

1. Regularly check the bearing temperature: During the operation of the equipment, regularly check the temperature of the bearings. If the temperature of the bearing rises abnormally, it may be a sign of insufficient lubrication or bearing wear.

2. Lubrication and maintenance: Lubricating oil should be added or replaced regularly for the bearings to ensure good lubrication. Ensure its quality is reliable and meets the usage requirements of organic fertilizer equipment. Determine all the parts that need lubrication and clean up oil stains and impurities before lubrication.

3. Cleaning and Maintenance: Regularly clean the debris and dust around the bearings to prevent impurities from entering the bearings and affecting the lubrication effect. Regularly check the wear condition of the bearings. If severe wear is found, they should be replaced in time.

4. Check the bearing clearance: Regularly inspect and adjust the bearing clearance to ensure it is within the normal range. Excessive or insufficient clearance may cause the equipment to operate unstably.

5. Inspection before equipment operation: Before starting the equipment, check whether an appropriate amount of lubricating oil has been injected into each lubrication point to ensure that the equipment operates in a good lubricated state.

6. Abnormal situation handling: If abnormal noise or vibration is detected during operation, the machine should be stopped immediately for inspection, to identify the cause and eliminate the fault. If the temperature of the bearing rises abnormally, the machine should be stopped immediately for inspection, and lubricating oil should be replenished or worn parts replaced.

Through the above daily maintenance measures, the service life of the bearings of the disc granulator can be effectively prolonged, ensuring the stable operation of the equipment and reducing maintenance costs and downtime.