The operation and maintenance of organic fertilizer ball shaping machine mainly include the following aspects:

1. Preparatory work: Before starting up, make sure all screws are tightened and check that the power cord is connected correctly to prevent malfunctions caused by loose components or circuit issues. Add lubricating oil to ensure the normal operation of all moving parts, reduce wear and tear, and extend the service life of organic fertilizer equipment. Before starting the equipment, make sure there are no foreign objects inside to avoid damaging the machine and affecting the quality of rounding.

2. Operation process monitoring: During operation, it is strictly prohibited to insert hands or other objects into the equipment to prevent safety accidents. After the equipment is started, observe its operation and confirm that there are no abnormal sounds or vibrations.

3. Daily cleaning: After each use, clean the residual organic fertilizer raw materials inside the machine to prevent the formation of hard lumps, which may affect the next use and equipment performance. Clear the residues and leftover materials around the equipment to keep the working environment clean and tidy.

4. Regular maintenance: Regularly lubricate the equipment, inspect the oil seals and bearings to prevent component damage caused by long-term hard grinding. Pay attention to the wear of the vulnerable parts of the equipment. Replace them in time when the wear is severe to ensure the circular polishing effect and the normal operation of the equipment.

5. Operator safety: Before operation, personal protective equipment such as protective clothing and safety helmets must be worn properly to avoid accidental injuries.

6. Equipment Safety: It is strictly prohibited to put hard objects or substances that are too large into the equipment to prevent overloading and ensure the safety of the equipment and personnel.

Through the above operation and maintenance measures, the service life of the organic fertilizer polishing machine can be effectively prolonged, production stability can be ensured, and product quality can be improved.