Preheating the organic fertilizer granulator is an important step to ensure the normal operation of the equipment and improve production efficiency. The following are the appropriate methods for preheating the organic fertilizer granulator:

1. Check the equipment status: Before preheating, it is essential to ensure that all components of the organic fertilizer equipment are complete and firmly connected. Check whether the lubricating oil in the reducer is sufficient and whether the oil pump is working properly. These checks help to prevent preheating failure or damage caused by equipment failure.

2. Heating operation: First, heat the machine to the required temperature. For new equipment, preheating is required to ensure that all components of the equipment operate at the normal working temperature. Pull continuously in the normal working direction for eight to ten times to ensure that the equipment can operate normally at high temperatures. Continue to heat up for about ten minutes, then turn on the machine, but keep heating as normal production requires continuous heat supply.

3. Temperature control: When the granulator is operating normally, the machine temperature should be kept stable and not fluctuate. Adjust the temperature differently according to the nature of the materials.

4. Shutdown operation and power cut-off: When shutting down, the power supply to the main unit must be completely cut off. The head plug (the part with the wrench) must be removed and preheated separately before the next use.

Through the above steps, it can be ensured that the organic fertilizer granulator reaches the best state during the preheating process, making full preparations for subsequent production activities.