Organic fertilizer production line equipment in daily use to do maintenance, so as to extend the service life, let's take a look at maintenance tips.

1. Keep your workplace clean. After each use of the equipment, thoroughly remove the residual adhesive sand inside and outside, clean up the scattered or splashed adhesive sand and flying objects on the equipment, wipe the exposed processing surface of the organic fertilizer equipment and the machine, apply anti-rust meat paint, and wear the corresponding protective cover to prevent the second intrusion of dust.

2. External oil injection holes. Gear and worm gear are lubricated with special grease for organic fertilizer equipment. The upper and lower gears should be filled with three-in-one grease every quarter. When filling, movable gear box cover and transmission gear cover can be opened respectively). Lubricate the sliding surface where the support gearbox is hinged with the support by dripping oil into it.

3. Often pay attention to the operation of organic fertilizer machine. There must be no serious abnormal noise, not to mention metal friction. If any abnormality is found, stop the machine immediately for inspection. The machine can only be used after the fault has been rectified.

4. Regularly check the standard gap between the granulator and the granulator. When replacing organic fertilizer granulation or granulation leaves, the working gap should be re-measured each time and adjusted several times. Can continue to use after qualified.

5. According to the line program controller, when the organic fertilizer production equipment cannot run, check whether the power supply voltage, power plug socket, connecting plug socket are normal, and check the internal fault of the controller.