To ensure the efficient operation and long-term stability of the pig manure organic fertilizer production line, the following are some key maintenance measures:

1. Keep the workplace clean: After each use, thoroughly remove any residual materials both inside and outside the equipment, and sweep up any scattered or splashed debris on the equipment. Wipe the exposed processing surfaces of the equipment and apply anti-rust paint to prevent dust from re-entering.

2. Regular maintenance of equipment: Regularly apply grease to the bearings, check the oil level in the reducer, and ensure that the organic fertilizer equipment is well lubricated. Regularly inspect the insulation condition of the electrical system to ensure that the electrical connections are firm.

3. Check the operating status of the equipment: Pay attention to whether there are any abnormal sounds or metal friction sounds during the operation of the equipment. If any abnormalities are found, stop the machine immediately for inspection. Regularly check the gaps between the components of the equipment to ensure compliance with the standards.

4. Preventive maintenance: Regularly inspect key components of the equipment, such as gears, bearings, motors, etc., and promptly identify and address potential issues. Regularly replace vulnerable parts such as belts and chains to ensure the normal operation of the equipment.

5. Operating Procedures: Ensure that operators are familiar with the operating procedures of the equipment to prevent equipment failure caused by misoperation. Operators should strictly abide by the operating procedures to avoid overloading the equipment.

6. Equipment upgrading and optimization: Timely update equipment and technology to enhance production efficiency and product quality. According to production demands, optimize the production process and reduce resource waste.

Through the above measures, the failure rate of the pig manure organic fertilizer production line can be effectively reduced, production efficiency and product quality can be improved, and the service life of the equipment can be prolonged at the same time.