To prevent the organic fertilizer equipment from being damaged due to rapid discharge, the following aspects can be considered:

1. Control the feeding speed: When feeding materials, discharge them slowly to avoid excessive speed or force. The feeding amount can be controlled by adding a feeder. There are two types of feeders: manual and automatic. Users should choose the appropriate feeder according to the actual situation.

2. Optimize the discharge system: Install pressure sensors and flow sensors at the discharge port to monitor the discharge pressure and flow in real time. When the discharge pressure is too high or the flow rate is abnormal, the sensor transmits a signal to the control system, which automatically adjusts the stirring speed or starts the auxiliary discharge device to ensure stable discharge. The automated discharge control system is adopted. According to the production requirements of the organic fertilizer production line, the discharge volume and discharge time are set. The system can precisely control the opening degree and time of the discharge valve to achieve quantitative and timed discharge.

3. Regular maintenance of equipment: Regularly clean the interior of the equipment to prevent material accumulation and blockage. Regularly inspect the key components of the equipment, such as bearings and gears, to ensure their normal operation.

4. Adjust equipment parameters: Add a frequency converter as needed to adjust the discharge speed and control the flow rate. Wear-resistant stainless steel screen mesh is selected, which extends the service life by three times. Adjust the aperture of the screen mesh for different materials.

5. Prevent material blockage: When the forklift is feeding materials, prevent hard foreign objects or large pieces of materials from entering. If the material is viscous, a vibrating motor or air flow device can be equipped to help the material fall smoothly and avoid blockage.

Through the above measures, it can effectively prevent the organic fertilizer equipment from discharging too quickly and damaging the equipment, and improve the production efficiency and service life of the equipment.